99.5% Purity 400Kg/H 600kg/H Copper Wire Recycling Machine
Contact Person : Thomas Wang
Phone Number : +86 18203683590
WhatsApp : +8618203683590
|Minimum Order Quantity :||1 Set/Sets||Packaging Details :||Full container for copper wire and cable granulator machine|
|Delivery Time :||15-20 work days||Payment Terms :||L/C, T/T, Western Union|
|Supply Ability :||30 Set/Sets per Month copper wire and cable granulator machine|
|Place of Origin:||Henan, China (Mainland)||Brand Name:||TMS|
|Application:||Scrap Copper Wire With Diameter 0.1-20mm||Type:||Dry Type|
|Power:||52.36kw||Function:||Separate Copper From Plastic|
|Separating Rate:||99.9%||Output:||300-400 Kg/h|
|Name:||Copper Wire Recovery Machine||After-sales Service Provided:||Engineers Available To Service Machinery Overseas|
Copper Cable Granulator,
Dry Type Scrap Metal Granulators
Model TMS-600 Dry Type Copper Wire Recycling Machine Cable recovery Machine
Copper wire recovery machine is used for recycling scrap copper wires/cables with diameter less than 25mm, better for single conductor diameter of 0.2-0.5mm. Scrap copper wires are shredded by crushers, then plastic and copper granules are separated by vibration and airflow. They come out from different outlets, dust is collected by dust collector. The recovery rate can reach 99.9%.
The choice of a Cable Granulator depends on the material properties of the types of copper wires and cables. Correct choice can not only improve the working efficiency, but also extend the service life of the machine. The cutting blades are made with Wire Cutting Technique, blades are replaceable for each other. We have different requirements for blades to different types of copper wires.
1). Air-fine Wires, Multi-strands
When dealing with Air-fine Wires and Multi-strands fixed blades and rotating blades must be very sharp so that copper wires can be cut and copper granules will be very clean and pure.
2). Single-strand and Single-core Wires :
When dealing with Single-strand and Single-core Wires, the rotating blades shall be a little blunt and fixed blades must be sharp. In this case, the spacing between the rotating blades and fixed blades is just able to hold wires but does not touch the cores. The wires are crushed but there will be little copper granules with plastics outside.
(Note: if blades are not adjusted in accordance with the requirements, it may cause too many copper clad granules and the separation is not clean, etc.)
|Model||Size||Capacity||Wire diameter range||Power||Volage||Wight|
|80-100 kg/h||0.1-20 mm||11.92 kw||380/240V||750kg|
|TMS-400||2700*1900*2300 mm||150-200 kg/h||0.1-20 mm||23.12 kw||380/240V||1200kg|
|300-400 kg/h||0.1-20 mm||52.36 kw||380/240V||3400kg|
|500-600 kg/h||0.1-30 mm||71.86 kw||380/240V||4100kg|