400 Kg/H Output 52.36kw Copper Wire Recycling Machine
Product Details:
Place of Origin: | Henan, China (Mainland) |
Brand Name: | TMS |
Certification: | CO, ISO, CE |
Model Number: | TMS-600 |
Payment & Shipping Terms:
Minimum Order Quantity: | 1 set |
---|---|
Price: | Negotiable |
Packaging Details: | One 20 feet container |
Delivery Time: | 15 work days |
Payment Terms: | L/C, T/T, Western Union |
Supply Ability: | 15 sets per month |
Detail Information |
|||
Name: | Copper Cable Wire Granulator | Function: | Crush And Separate Copper From Plastic |
---|---|---|---|
Type: | Dry | Motor Power: | 49.86kw |
Separating Rate: | 99.9% | Productivity: | 300-400 Kg/h |
Total Weight: | 3400kg | Warranty: | 1 Year |
High Light: | copper wire granulator separator,scrap metal granulators |
Product Description
Medium Model 600 Copper Cable Wire Granulator Separator Machine 300-400 Kg/H
Brife Introduction
Copper wire granulator machine is used for recycling scrap copper wires/cables with diameter less than 25mm, better for single conductor diameter of 0.2-0.5mm. The wire is like auto wires, communication cables and kinds of miscellaneous wires and cables.
copper wires are shredded by crushers, then plastic and copper granules are separated by vibration and airflow. They come out from different outlets, dust is collected by dust collector. The copper granules and plastic granules will be separated by small vibrator twice time. The recovery rate can reach 99.9%.
Model | Dimension (mm) | Total Power (kw) | Capacity (kg/h) | Weight (kg) |
Mini-400 | 1500*1500*1900 | 11.92 | 100 | 750 |
TMS-400 | 2700*1900*2300 | 23.12 | 150-200 | 1200 |
TMS-600A | 3980*1950*2216 | 49.86 | 300-400 | 3400 |
TMS-600B | 4300*1950*2400 | 52.36 | 300-400 | 3400 |
TMS-800 | 9200*4100*2400 | 78.76 | 500-800 | 8000 |
TMS-1200 | 16000*10000*3000 | 129.36 | 1000-1500 | 12000 |
Protective Devices
1). There is a protective baffle inside the material inlet to prevent crushed material from casting out of the feeding mouth.
2). High-speed rotating flywheels and belt transmission parts are covered with fixed protective covers.
Noise Level
1). The machine’s unloading noise level is below 80dB.
2). Special Note: when the machine is working, the noise would increase as the machine’s working load is increasing, so the operator must wear protective earplugs in working.
Use & Maintenance
In the case of correct selection of machines, the service life also depends on appropriate use and timely maintenance. High temperature complex lithium base grease is used for bearings, so they are high temperature resistant, good at impact resistance, have a long service life. According to the actual use, users shall regularly inject grease. When Chopper blades get blunt, remove the blades and sharpen them with a blade sharpening machine, and adjust the spacing between fixed blades and rotating blades to 0.15mm-0.25mm. The grease for bearings should be replaced every 300 working hours, and grease for chains shall be added every 15000 working hours.