250 Ton Pressure 500*500mm Bale Size Scrap Metal Baler Scrap Recycling Machine
Contact Person : Thomas Wang
Phone Number : +86 18203683590
WhatsApp : +8618203683590
|Minimum Order Quantity :||1 set||Price :||negotiable|
|Packaging Details :||Standard exported ply wooden case||Delivery Time :||10 work days|
|Payment Terms :||L/C, T/T, Western Union||Supply Ability :||20 sets per month|
|Place of Origin:||China||Brand Name:||TMS|
|Certification:||CO, ISO||Model Number:||TMS-400|
|Wire Diameter Processed:||0.1-20 Mm||Capacity:||150-200 Kg/h|
|Copper Purity:||99.9%||Name:||Copper Recycling Machine|
|Voltage:||380 V Or Customised||Function:||Recycle Scrap Copper Cables|
|Size:||2700*1900*2300 Mm||Power:||23.12 Kw|
copper wire recycling machine,
scrap metal recycling equipment
400 Copper recycling machine is used for handling automobile wires, communication cables and other types of miscellaneous wires and cables. This machine has a compact structure, and shows stable and reliable performance. Scrap copper wires and cables are chopped by the Chopper in the machine and then plastic pieces and copper granules are separated by airflow and vibration. Copper granules and plastic pieces come out of the machine through different outlets, and dust is collected by Dust Collector.
(Copper wires less than 20mm in diameter are suitable; single conductor with diameter of 0.2-0.3mm is best.). If the diameter of cables is more than 20mm and less than 40mm, the large model TMS-800 and 1000 are best choice for you.
1. The whole system is controlled by the Electricity Control Panel.
2. The operation is stable.
3. Minimum copper recovery rate can reach 99%.
4. Small area occupy and save labour.
Processing capacity: 150-200kg/hour.
Total Power: 23.12kw.
Blade Quantity: 8 Rotating, 4 Fixed.
Motor Power: 15kw
Rotating Blade Quantity: 8
Quantity of Fixed Blades: 4
Screen Size: Φ3mm / Φ4mm
Spindle speed: 900r/min
High pressure fan
Vibration Motor: 0.18kw (2 Units)
Vibration: Frequency Regulation
Bottom Blower Fan
Fan Power: 2.2 kw
Filter: Φ280 * 1000
Air Volume Control: electric control panel on the electric control box
Upper Suction Fan
Fan power: 2.2 kw
Material Collecting Mode: Cyclone Dust Collector
Collecting Bag: 1
Dust bag: 1
Small shaking table
The choice of a Cable Granulator depends on the material properties of the types of copper wires and cables. Correct choice can not only improve the working efficiency, but also extend the service life of the machine. The cutting blades are made with Wire Cutting Technique, blades are replaceable for each other. We have different requirements for blades to different types of copper wires.
1). Air-fine Wires, Multi-strands
When dealing with Air-fine Wires and Multi-strands fixed blades and rotating blades must be very sharp so that copper wires can be cut and copper granules will be very clean and pure.
2). Single-strand and Single-core Wires:
When dealing with Single-strand and Single-core Wires, the rotating blades shall be a little blunt and fixed blades must be sharp. In this case, the spacing between the rotating blades and fixed blades is just able to hold wires but does not touch the cores. The wires are crushed but there will be little copper granules with plastics outside.
(Note: if blades are not adjusted in accordance with the requirements, it may cause too many copper clad granules and the separation is not clean, etc.)